EPDM

GenFlex Roofing Systems features three single-ply EPDM membranes: GenFlex EPDM (Ethylene Propylene Diene Monomer) - an elastomeric membrane GenFlex AFR – an EPDM membrane that is fire retardant, and GenFlex FRM - an EPDM membrane reinforced with tough polyester fabric. Both are designed for ultra high performance. GenFlex EPDM systems have a performance history of over 20 years and can be warranted for up to 20 years depending on the system design.

EPDM comes 45 mil (1.1mm) or 60 mil (1.5mm ) thick and is available in rolls up to 50'(15.2m) wide by 250' (76.2m) long. It is ideal for either new roofs or for roofing over a variety of common roof deck types and insulation materials.

Installation systems include ballasted, fully-adhered and a number of mechanically-attached alternatives. Components include roofing tapes, bonding adhesive, sealants, flashing and applicable rooftop accessories.

This is a high-performance membrane, resistant to tears, impacts, punctures and normal roof traffic. Normal structural movement has limited effect on its integrity. This membrane provides excellent resistance to ozone and ultraviolet light exposure.

AFR Membrane is standard EPDM that is designed to be fire retardant for low slope roofs on a variety of deck types.

GenFlex EPDM AFR membrane may be installed as a fully adhered, mechanically attached, or ballasted system. Available in 45 mil (1.1mm) and 60 mil (1.5mm) thick, 10’ (3.1m), 16.63’ (5.2m), and 20’ (6.1m) wide by 50’ (15.3m) or 100’ (30.5m) long.

FRM membrane has most of the same characteristics of the EPDM membrane. In fact, the FRM is standard EPDM reinforced with a tough polyester fabric. The result is superior fatigue, tear and puncture resistance. Installs using the Bar in Seam or Fully Adhered System.

Available 45 mil (1.1mm) or 60 mil (1.5mm) thick, 10'(3.0m) wide by 100'(30.5m) long.

All three membranes are designed for those situations that demand superior tensile strength performance. It Fast, tough, long-lasting.